Spec Sheet
Included with the System
• Ultimate Sensor (with 10’ cord)
• Ultimate Controller
• Stainless steel hose clamp
• 3 year warranty, 5 year warranty when purchased with an
S5 Series pump
Why this System is so Reliable:
To insure reliable ON/OFF operation, the system uses
Triac technology. Triacs are digital switches proven in
high power switching applications, such as microwaves
and toasters.
Coupled with the embedded computer in the Ultimate
Sensor, the Triac provides a foolproof system for
detecting rising water and activating the pump.
Ultimate Sensor with Ultimate Controller (USC3)
1807044 11/11
Available from:
PHCC Pro Series Ultimate Controller
Features Include:
• Monitors and sounds an alarm when:
• AC power has failed
• 9v battery is low or slide
switch is off
• Pump or plumbing problem
is detected caused by pump
running continuously for
10 minutes
• Sensor is unplugged or
not operating
• System is operating light
(ashes)
• Reliable and proven Triac
technology used in many industries
• Adjustable run time from 5-45 seconds
after the water level falls below the sensor
• Includes external terminals (low voltage control 12/24v)
for connecting to a remote dialer or home security system
• Sensor can be unplugged for ease of installation
• Activates pump weekly to exercise and extend pump life
• Universal controller mounting
• 4’ power cord
1
3
2
PHCC Pro Series Ultimate Sensor
Features Include:
• Imbedded computer monitors any
material buildup on sensor rod and
keeps on working
• Sensor can be raised or lowered to
adjust activation level
• Slow Fill Recognition senses the water
level regardless of how fast or slow
the sump pit is lling up
• Designed for use in many applications
including sump and sewage
• Easy Installation - with a removable
connector, the sensor wire can be easily
fed through small sump pit cover holes,
then reconnected directly to the controller
• 3.5” long, 316 grade stainless steel sensor rod will not corrode
• Sensor sends “Heartbeat” signal to controller, if the sensor
is unplugged or not operating an alarm will activate
• Mounts to discharge pipe with included stainless steel
hose clamp
• The ultimate choice for high cycling applications
How this System Works:
1. Embedded computer sends signal down the 3.5 inch long
stainless steel sensor rod
2. When the water level touches the rod, the signal gets
absorbed, modifying the signal
3. When the controller receives the modied signal from the
sensor, it powers the digital Triac circuit, activating the pump