Instructions / Assembly

Table Of Contents
CMG5 2.5 Cu Ft. Cement Mixer 10
Emptying the Fuel Tank
To store for extended time, drain the gasoline from the fuel tank. To drain gasoline:
1. Turn the fuel valve to the “off” position.
2. Remove the fuel filter cup. (See “Fuel Filter Cup Cleaning” earlier in this section.)
3. Empty the fuel filter cup of any fuel.
4. Place a receptacle underneath this engine to catch gasoline as it drains.
5. Turn the fuel valve to the “on” position and allow all gasoline to drain.
6. Turn the fuel valve to the “off” position.
7. Replace the fuel filter cup.
8. Store the drained gasoline in a suitable place.
Do not store gasoline for more than 3 months.
STORAGE/TRANSPORT PROCEDURES
Never place any type of storage cover on this cement mixer while it is still hot.
When transporting or storing for extended time:
• Allow engine to fully cool before moving it. A hot engine and exhaust system can burn you and ignite some materials.
• Empty the fuel tank. (See “Emptying the Fuel Tank” in the “Maintenance/Care” section.)
• Turn the fuel valve to the “off” position.
• Disconnect the spark plug.
• Do not obstruct any ventilation openings.
• Store in a cool dry area, free of excessive dust.
Storage Time
Recommended Storage Procedure (which will help prevent difficult starts)
Less than 1 month
No storage procedure required.
1 to 2 months
Fill with fresh gasoline and add gasoline conditioner
2 months to 1 year
Empty the fuel tank. (See Emptying the Fuel Tankin the Maintenance/Caresection.)
1 year or more
Empty the fuel tank. (See Emptying the Fuel Tankin the Maintenance/Caresection.)
Disconnect the spark plug.
TROUBLESHOOTING
IMPORTANT: If trouble persists, call our customer help line at 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Central Time.
Symptom
Cause
Solution
Engine will not start.
Engine switch is set to "off."
Set engine switch to "on."
Fuel valve is turned to "closed."
Turn fuel valve to "open."
Choke is open.
Close the choke.
Engine is out of gasoline.
Add gasoline.
Engine is filled with contaminated and/or old
gasoline.
Drain gasoline from the engine and add new
gasoline.
Spark plug is dirty.
Clean spark plug.
Spark plug is broken.
Replace spark plug.
Cement Mixer is not on level surface.
Move to a level surface to prevent triggering
the low oil shutdown.
Oil is low.
Add or replace oil.