Use and Care Manual

LONG TERM STORAGE
When cleaning for long term storage (more than 48 hours).
It is very important that the Paint Sprayer is not stored with
any water or water-based material left in the Pump, Hose,
Tubes, or Spray Gun. This will corrode the product.
IMPORTANT: Clean
the Sprayer before
storage.
1. Remove paint hose if not
already removed.
2. Turn the unit over and
loosen the Clamps
from both Tubes, then
disconnect Tubes from
the Pump Body.
3. Add one ounce of light
household oil or a
pump storage product
into each inlet.
4. Turn Prime/Spray switch
to Spray.
5. Turn Pressure Control
Knob to Low/Spray.
6. Hold a rag over the paint
hose outlet.
7. Switch Power to ON for
five seconds, then turn
the power OFF.
8. Turn Prime/Spray switch
to Prime, this will keep
storage fluids in sprayer.
9. Replace the Tubes and
secure with the Clamps.
10. Wipe the sprayer with a clean cloth. Store in a
clean dry location out of reach of children.
Hi Spray Low Spray Prime/Clean Roll
ON 5 seconds
then OFF
Page 17
ITEM # APS517 Airless Paint Sprayer Operating Instructions