Warranty

Item # DRNAGS Drain Cleaner Manual
3
OPERATING INSTRUCTIONS
WARNING! Before use, you must be familiar with the functions and be proficient in operating it.
Rotate the locking ring counterclockwise to grasp the flexible shaft and produce a large
thrust, so as to facilitate the removal of blocked garbage and prevent the flexible shaft from
retracting into the drum; rotate the locking ring clockwise to relax the flexible shaft for easy
advance and retract of the flexible shaft.
ATTENTION! When the flexible shaft-out of the tool is less than 8 inch or more than 19 feet, do not set the
locking ring in the locked state. Otherwise, it will cause the flexible shaft to be damaged.
Variable Speed Trigger
Grasp the trigger, and press it with your finger to control the speed (between 0~560 RPM).
The greater the pressure, the higher the speed.
Forward Rotation ON Forward Rotation OFF Reverse Rotation ON Reverse Rotation OFF
Forward and Reverse Rotation Switch
This switch controls the steering of the flexible shaft: press the L for forward rotation and press the R for reverse
rotation. NOTE: The reverse rotation is used to retract the flexible shaft in the trapped state.
Flexible Shaft Auto Scaling Handle Grip
1. Press the forward and reverse rotation button L. Press the speed switch
lightly, move the handle to the F position, and the shaft will move forward.
2. Press the speed switch lightly, pull the Handle back to the R position, and
the flexible shaft will retract backwards.
3. When the forward and reverse rotation button R is pressed, the flexible
shaft stretches in the opposite direction.
4. When the operating handle is in the O neutral position, the flexible shaft
stops stretching in forward or reverse rotation.