Specification

GSSIM Mini Scaffolding Assembly & Operating Instructions

STEP 3

Install “Platform C” on side braces B so that platform is fully seated within inner channel on top of side braces.

STEP 4

Rotate the platform clips into the engaged position. (See Figure D)

STEP 5

Install 4 casters (D) into legs of frames with 4 Connector Pins (F) (See Figure E)

STEP 6

Remaining 4 Connector Pins must be inserted fully in holes on frame.

(FIGURE G)

WARNING: Be certain all eight Pins are fully inserted and locked intos holes.

(See Figure H)

WARNING:

• RECHECK ALL SIDE BRACE LOCK PINS

AND ALL CONNECTOR PINS FOR FULL

ENGAGEMENT BEFORE ACCESSING

PLATFORM.

• RECHECK PLATFORM TO BE SURE IT IS

PROPERLY SEATED WITHIN SIDE BRACE

CHANNEL AND THE PLATFORM CLIPS ARE

FULLY ENGAGED.

• WHEN ACCESSING PLATFORM, CLIMB

OVER TOP OF FRAME LADDER.

• DO NOT SWING AROUND SIDE OF FRAME.

• REMOVE THE PLATFORM BEFORE

ADJUSTING THE DECK LEVEL.

TYPICAL APPLICATIONS INCLUDE:

• Painting

• Overhead Door Installation

• Acoustical/Ceilings

• Lighting and wire Maintenance & Electrical

• Drywall installation & taping

• General Building Maintenance

• Window Cleaning & Treatment Installation

• HVAC Installation

Figure D

8 Connector Pins (F)

Figure G

Figure E

Figure H