Specification

GSSIM Mini Scaffolding Assembly & Operating Instructions
3
Figure B
Figu
Figure C
Figure C
ASSEMBLY INSTRUCTION
For proper assembly, the Mini Scaffold must be comprised of these individual parts. (See Figure A)
Item
Part Name
Qty
A
Frame
2
B
Side Brace
2
C
Platform
1
D
Caster
4
E
Lock Pin
4
F
Connector Pin
8
STEP 1
Attach side brace B to two frames A:
• Pull L-shape lock pin at each end of side brace to the
disengaged position. (Figure B)
• While holding L-shape pin in disengaged position,
place U-channel on each end of side brace B around
leg of frame A at desired platform height.
• Release lock pin and be sure that pin fully engages
into hole in frame A leg.
Pin Is Disengaged (Unlocked Position)
Pin Is Fully Engaged (Locked Position)
STEP 2
Attach second side brace B to both frames A (REPEAT INSTRUCTIONS IN STEP 1).
All four L-shaped lock pins must be inserted fully in holes on frame. (FIGURE C)
WARNING: Be certain Pin is fully inserted into hole (Figure B). Do not leave the Pin half-inserted.
WARNING:
• BOTH SIDE BRACES MUST BE POSITIONED AT THE SAME HEIGHT ON THE FRAMES SO THAT THE
PLATFORM WILL BE LEVEL.
• BE SURE ALL 4 L-SHAPE LOCK PINS ARE FULLY ENGAGED IN HOLES OF FRAMES.
• REMOVE THE PLATFORM BEFORE ADJUSTING THE DECK LEVEL.
Figure C