Specifications

Ki Pro v3.2 www.aja.com

Figure 12. Exo-skeleton Camera Mounting

Accessory Rod Kit

Setup and

Adjustment

An option that can be added is an accessory rod kit that adds plates to each side of the

Exo-skeleton frame so that 15mm user-supplied rods can be used with the camera. Rods

are handy for mounting battery packs, matte boxes, and a wide variety of other

accessories.

Figure 13. Rod Accessory Kit Option

Base Ki Pro Exo-skeleton

chassis with camera mount

Knurled thumbscrews

secure Ki Pro chassis

to Exo-skeleton

Loosen

Camera

Mount

Locking

Knob

Slide Mount

off of Exo-skelton

Alignment

Mounting

Screw

Locate the Camera

Mounting screw underneath

(2 sizes provided),

align pin to Camera base

and tighten the Mounting screw

to fasten securely.

Replace Mount on

Exo-skeleton when done,

and tighten Locking Knob

to lock camera in place.

Kit components:

2 endplates

4 screws (5/32 allen)

4 knobs with plastic washers

Optional Rod Accessory Kit Assembly