Specifications

Ki Pro v3.2 www.aja.com

Figure 5. Ki Pro Connector Side and Back Sid

Connections • HDMI—video with embedded audio, 2 channel input and recording support as of v2.0

firmware. 1x connector for input and 1x connector for output.

• HD/SD SDI Input and Output, with 2 or 8 channel embedded audio as of v2.0 firmware

(2x BNC)

• HD/SD Component YPbPr/RGB Video, 3x BNCs for input, and 3x BNCs for output.

• Composite video output (CVBS, 1x BNC)

• 2 channel balanced analog audio Input and Output (4x XLR)

• 2 channel unbalanced analog audio Input and Output (4x RCA)

• Line/Mic Level Switch (analog XLR audio input level)

• LTC Input and Output (2 BNC, non-looping output during recording)

•Lens Tap*

•LANC

• 1394a FireWire port (connection to camera for timecode and control)

• 1394b FireWire port (connection to host computer)

• LED Indicator for IEEE 802.11 Radio ON/OFF

• 10/100/1000 Ethernet LAN

• 9-pin serial port for RS422 control of Ki Pro via external editing systems

NOTE: Above item marked with an asterisk (*) is not supported in Ki Pro versions 1.0 through 3.0

software.

LTC Timecode Input

And Output

Two BNCs provide connections to the house LTC timecode generator or

source. Connections are high impedance. One BNC is for input and the other

for output. Note: the Ki Pro LTC output does not provide output during EE or

recording operations; the output is only for use during playback, as might be