User's Manual

23
Once the wireless network is connected successfully, the Network Address will indicate
sameIPrangeasMicrosoftVirtualWiFiMiniportAdapter.


4. Soft‐APFunction
Except becoming a  wireless client of other wireless access points, this USB Wireless LAN
utilitycanactsasawirelessserviceprovider.Youcanswitchtheoperatingmodeto“
Access
Point” mode to simulate the function of a real wireless access point by software, and all
othercomputersandwirelessdevicescanconnecttoyourcomputer wirelessly,evenshare
theinternetconnectionyouhave.
Tothe WirelessLANUSBAdaptertobridgeyour  wiredandwirelessnetwork,thefollowing
requirementsmust
bemet：
1.TheWirelessLAN USB Adaptermustbeinstalled onacomputer connectedtothewired
network.
2.Eitherconfigurenetworksharing(refertotheappendix foranexample)orbridgethetwo
interfaces(wirelessandwired)onthecomputer.
3.Set the wireless station’s  IPaddress to
 be in the same subnetas the computer in which
theWirelessLANUSBAdapterisinstalled.

