User's Manual

11
3. WirelessNetworkConfiguration
The Configuration Utility is an applica tion that helps you to configure the Wireless LAN
adapterandmonitorthelinkstatusandstatisticsduringthecommunicationprocess.
3.1 General
Inthe“General”,youcanimmediatelymonitorthelinkstatus.

Status:Currentconnectionstatus
Speed:Showcurrenttransmitrateandreceiverate.
Type:Networktypeinuse.
Encryption:Encryptiontypeinuse.
SSID:TheCurrentAPnameofusertype.
SignalStrength:Receivesignalstrength
LinkQuality:Displaylinkqualitystrength
NetworkAddress:Displaythecurrentconnection’sMACAddress,IPaddress,
SubnetMask,
andGatewayinformation.
Click“
ReNewIP”buttontorefreshthecurrentAP.

3.2 Profile
In the “Profile”,you can viewthe  current usingAvailablePoint(s). You  canadd, remove or
edit the current Available Point(s). Also you can duplicate the AP or Set current AP as
Default.