User's Manual

Wireless 54Mpbs USB 2.0 Adapter

Step 1: Plug-in wireless card and you will see SiS utility appears on your system tray.

Step 2: Double-Click on the crab icon ( ) and an 802 11b/g USB Wireless LAN Adapter dialog box will appear.

[NetStatus]

The NetStatus tab shows the Link Status, Network Mode, SSID, Channel, Tx Rate. You can also change your Ad

hoc/Infrastructure network, enable or disable Data Encryption, set your SSID, configure a Channel number for RF

transmission or fix Tx Rate on a specified speed in this tab.

[Site Scan]

After select the Site Scan tab, please wait system to scan or click Re-fresh button, all Access Point and Ad-hoc

devices within detectable range will be found and their related information will be displayed in the list. You can

assign Access Point or Ad-hoc devices with which you want your Wireless LAN USB Adapter to connect. You also

can establish or change current connection just double clicking SSID from the list.

If you check the Use Windows XP to configure my wireless network settings, it will change to Windows XP

configuration, which mentioned in Method 1

, to set the Wireless link function.

Caution: If you want to it on other place, such as USA, you can only select Channel 1-11. For Europe region which can

support Channel 1 -13, It would be disable by firmware before placing on USA market.