User's Manual

Wireless 54Mpbs USB 2.0 Adapter

4. Wireless Network Configuration

There are two different ways to configure Wireless LAN USB Adapter on your system. They are alike in functionality.

Therefore, you can choose any one of them which you prefer to use.

Method 1 – Configured at Windows XP Configuration

Step 1: After installing driver and utility on your system, let’s start to setup your wireless LAN card. First of all, you

will see the connection icon in the system tray (from the right-bottom corner of your screen). Right-Click on the

Network Connect.

Step 2: Click the View Available Wireless Networks and it will pop-up a setup dialog as below. If there are some

efficient access points and the efficient range contains your USB Adapter range, then SSID will show in the

Available Networks list. Select one and click the Connect button.

Method 2 – Configured at “SiS Advanced Configuration”

The second configuration utility is for Windows (XP/2000/ME/98SE) system. The Configuration Tab contains

several fields where operating parameters of the driver can be viewed or changed. Change of any parameter in this

panel can be applied to the driver without restarting the PC needed.