User's Manual

your wireless client earlier automatically connect to the Access Point.

[WPS Summary]

From this section, you can view the current WPS status, Configured, SSID, Auth mode,

Encrypt Type, Default Key Index, WPS Key, and AP PIN information.

Reset OOB: Click this button to rest the settings.

[WPS Progress]

WPS Mode: Specify the AP router acts as a Registrar or an Enrollee.

In PIN method (PIN-Personal Identification Number), When your 11n router acts as a

Registrar, your must enter “Add Enrollee PIN code” on WPS config section, this Enrollee PIN

code should be provided by the Enrollee. If your 11n router acts as a Enrollee, in WPS config

section, the “PIN code of this AP” will automatically generate for you. The purpose of PIN

code is to provide the security key to Registrar (AP/Server). Therefore, WPS (Wi-Fi Protected

Setup) can be established completely.

In PBC Method (PBC-Push Button Communication), while the AP router acts as Registrar or

Enrollee, and click “Start WPS Config” button, the WPS (Wi-Fi Protected Setup) will establish

the connection automatically.

PIN: Enter the PIN code from the registrar or enrollee.

WPS Status: Here shows the current status of the WPS function.