User's Manual

SSID Choice: Select the SSID which you want to configure.

Security Mode: This function allows you setup the wireless security. Enable security mode

could prevent any unauthorized access to your wireless network. [Open: If your wireless router

is using “Open” authentication, then the wireless adapter will need to set to the same

authentication type. Shared: Shared key is when both the sender and the recipient share a

secret key. WPA, WPA-PSK, WPA2, WPA2-PSK, WPA-PSK/WPA2-PSK, and WPA1/WPA2:

WPA-PSK offers two encryption methods, TKIP and AES. Select the type of algorithm, TKIP or

AES and then enter a WPA Shared Key of 8~64 characters in the WPA Pre-shared key field.]

Encryption Type: For Open & Shared authentication mode, the selection of encryption type

are None and WEP. For WPA, WPA2, WPA-PSK, and WPA2-PSK authentication mode, the

encryption type supports both TKIP and AES.

WPA Pre-shared Key: This is the shared secret between AP and STA, For WPA-PSK and

WPA2-PSK authentication mode, this field must be filled with character longer than 8 and less

then 64 lengths.

WEP Key: Only valid when using WEP encryption algorithm. The key must match with the

AP’s Key. There are several formats to enter the keys.

-- Hexadecimal (128bits): 26 Hex characters (0-9, a-f)

-- ASCII (128bits): 13 ASCII characters.

WPA Algorithms: Select TKIP, AES, TKIP/AES for the WPA Algorithms.

Enable Pre-Authentication: The two most important features beyond WPA to become