User's Manual
2
5
connects if the value is zero.
(3) DLS Status
After configuring DLS successfully, show MAC address of the opposite side and Timeout
Value of setting in “DLS Status”. In “DLS Status” of the opposite side, it shows MAC address
of itself and Timeout Value of setting.
[11n Configurations] The Station 11n Configurations page shows the settings and current
operation status of the station.
MPDU Aggregation: MPDU stands for MAC Protocol Data Unit. MPDUs are the fragmented
units of MSDU, also called MAC frames, encapsulate the higher layer protocol data or contain
MAC management messages.
MPDU Density: Select 0~7 to configure the MPDU density.
Aggregation MDSU (A-MSDU): A-MSDU stands for $JJUHJDWH0$&VHUYLFHGDWDXQLWThis
option allows aggregation of multiple MSDU in one MPDU. The MSDU is that unit of data that
is received from the LLC sub-layer which lies above the MAC sub-layer in a protocol stack.
The LLC and MAC sub-layers are collectively referred to as the DLL.