User's Manual

34
<Current Routing table in the system>
To see the detail settings of current routing table in the system.
<Dynamic Routing Setting>
RIP: RIP can be used to cache routes learned by routing protocols, thus allowing the
automation of static routing maintenance. The router, using the RIP (Routing Information
Protocol) protocol, determines the network packet’s route based on the fewest number of hops
between the source and the destination. In this case, you could automatically adjust to
physical changes in the network layout. Default is Disable.
3.4.7 QoS
QoS (Quality of Service) is a different priority bandwidth control; this function could help to
separate the packet to different priority to WAN connection. This option will provide better
service of selected network traffic over various technologies. Deploying QoS management to
guarantee that all application receive the service levels required and sufficient bandwidth to
meet performance expectations is indeed one important aspect of modem enterprise network.