User's Manual

19
User Name: This field is only available when you set WAN Connection Type as PPPoE or
PPTP.
Password: This field is only available when you set WAN Connection Type as PPPoE.
Idle Disconnect Time in seconds: Disconnect After time of inactivity (in seconds): This field is
optional and allows you to configure to terminate your ISP connection after a specified period
of time. This field is optional and allows you to end your ISP connection after the specified time
of inactivity. A value of zero allows infinite idle time. If Tx Only is checked, the data from
Internet will be skipped for counting idle time. If Tx Only is checked, Internet activity such as
downloading data, is not counted as idle time.
MTU: It means Maximum Transmission Unit (MTU) of PPPoE packet.
Heart-Beat or PPTP/L2TP (VPN) Server: Please enter the server name or server IP of the
authentication server of BigPond server.
Host Name: This field allows you to provide a host name for WIRELESS ROUTER. It is
usually requested by your ISP.
MAC address: This field allows you to provide a unique MAC address for WIRELESS
ROUTER to connect Internet. It is usually requested by your ISP.
Port Trigger
Port Trigger function allows you to open certain TCP or UDP ports to communicate with the
computers connected to WIRELESS ROUTER. This is done by defining trigger ports and
incoming ports. When the trigger port is detected, the inbound packets to the specified
incoming port numbers are redirected to your computer.