User's Manual
48
4.2SecuritySettings
AuthenticationType:Pleaseselectawirelessauthenticationtypeyouwishtouse.Available
options are ‘Open’, ‘Shared’, WPA‐PSK’, ‘WPA2‐PSK’, and ‘WPA‐PSK / WPA2‐PSK’. If you
wanttodisablewirelessdataencryption,youmustselect‘Open’.
EncryptionType:Pleaseselectanencryptionmode.Theavailableoptionsinthis
settingitem
willvary depending on the authenticationtypeyou select. If youselect‘Not Use’, data will
notbeencryptedand people with somenetworkingknowledgewillbeabletoreadthedata
youtransferwithpropertool.
WPAPre‐sharedKey:PleaseinputtheWPApre‐sharedkey
here.Onlyclientswiththesame
pre‐shared key you inputted here will be able to connect to your computer. This setting is
onlyavailablewhenyouselectoneofWPAencryptions
GroupRekeyInterval:Youcanspecifythetimeintervaltore‐issuethekeytoyourwireless
clientshere.
Youcan click the button ’10seconds’ or ‘Kpackets’ to change the unit of time
interval. (every 10 seconds or a thousand data packets times the value you specified in
‘GroupRekeyInterval’field).
Wep Key: Please inpu t the WEP encryption key here when you select ‘WEP’ as encryption
type.
There are 2 types of WEP key: Hex(number 0 to 9, and ASCII characters A to F) and
ASCII (all alphanumerical characters plus symbols). Please select the type of WEP key first,
andtheninputtheWEPkeyaccording tothe typeofWEPkey youselected.Ifyouwant
to
use WEP 64 bits encryption, please input 10 characters if you select HEX, or input 5
charactersifyouselectASCII.IfyouwanttouseWEP128bitsencryption,pleaseinput26
charactersifyouselectHEX,orinput13charactersifyouselectASCII.128bitsencryption