User's Manual

47
SecuritySetting:Setthesecurityoptions(wirelessdataencryption).Pleaserefertochapter
4‐2‘SecuritySettings’fordetails.
Country Region Code: Please select the country code of the country or region you live .
Availableoptionsare0‐7,whichwillaffecttheavailablewirelesschannelsyoucanuse:
 0:
FCC(US,Canada,andothercountriesuses
 FCC radiocommunicationstandards)
 1:ETSI(Europe)
 2:SPAIN
 3:FRANCE
 4:MKK
 5:MKKI(TELEC)
 6:ISERAL(Channel3to9)
 7:ISERAL(Channel5to13)
Pleasenotethatonlychangethecountrycodeifyouare in
differentcountry.Forexample:
whenoperating this productinUS, onlychannels1~11 canbeoperated. Selectionofother
channelsisnotpermittedunderFCCregulations.
Noforwardingamongwirelessclients:Checkthisboxandwirelessclientswillnotbeableto 
sharedatawitheachother.
HideSSID:Check
thisbox andthe SSIDwill notbe broadcastedtothepubli c.Your wireless
clients must know the exact SSID to be able to connect to your compu ter. This option is
usefultoenhancesecuritylevel.
AllowBW40MHz:CheckthisboxtoallowBW40MHzcapability.
Beacon(ms): You can
define the time interval that abeaconsignalshouldbesend. Default
valueis100.Donotmodifythisvalueunlessyouknowwhatwillbeaffected.
TX Power: You can select the wireles s  output power here. Please select a proper output
power setting according to your actual needs. You
may not need 100% of output power if
otherwirelessclientsarenotfarfromyou.
Idle Time: Select the idle time for the wireless access point. Default value  is 300. Do not 
modifythisvalueunlessyouknowwhatwillbeaffected.

Tosavechanges,click‘Apply’button.Or
youcanclick‘Default’toresetallvaluestofactory
defaultvalue.





