User's Manual

1.4 Before you start

You must have the requirements as follow,

Θʳ A computer with an available PCI slot

Θʳ At least a 300MHz processor and 32MB memory

Θʳ Windows 2000/XP/Vista support

Θʳ A CD-ROM drive

Θʳ Wireless PCI Adapter properly installed

1.5 Hardware Installation

STEP1: Turn off your computer and remove its cover

STEP2: Insert the PCI card to an available PCI slot firmly. Please refer to the illustration below:

STEP3: Secure this card to the rear of the computer chassis and put back the cover.

STEP4: Secure the antenna to antenna connector of the card. Please refer to the illustration

below:

(Diagram 1: The illustration for 2 antennas model)

STEP5: Turn on the computer.