User's Manual
49
4.2SecuritySettings
AuthenticationType:Pleaseselectawirelessauthenticationtypeyouwishtouse.Available
options are ‘Open’, ‘Shared’, WPA‐PSK’, ‘WPA2‐PSK’, and ‘WPA‐PSK / WPA2‐PSK’. If you
wanttodisablewirelessdataencryption,youmustselect‘Open’.
EncryptionType:Pleaseselectanencryptionmode.Theavailableoptionsinthissetti
ngitem
willvary depending on the authentication type you select.Ifyou select ‘Not Use’,datawill
notbeencryptedandpeoplewithsomenetworkingknowledgewillbeabletoreadthedata
youtransferwithpropertool.
WPAPre‐sharedKey:PleaseinputtheWPApre‐sharedkeyhere.Onlyclientswithth
esame
pre‐shared key you inputted here will be able to connect to your computer. This setting is
onlyavailablewhenyouselectoneofWPAencryptions
GroupRekeyInterval:Youcanspecifythetimeintervaltore‐issuethekeytoyourwireless
clientshere. You can click the button ’1
0seconds’ or ‘Kpackets’ to change the unit of time
interval. (every 10 seconds or a thousand data packets times the value you specified in
‘GroupRekeyInterval’field).
Wep Key: Please input the WEP encryption key here when you select ‘WEP’ as encryption
type. There ar
e 2 types of WEP key: Hex (number 0 to 9, and ASCII characters A to F) and
ASCII (all alphanumerical characters plus symbols). Please select the type of WEP key first,
andtheninputtheWEPkeyaccording tothetype ofWEP keyyouselected.If youwant to
use WEP 64 bits en
cryption, please input 10 characters if yo u select HEX, or input 5
charactersifyouselectASCII.IfyouwanttouseWEP128bitsencryption,pleaseinput26
charactersifyouselectHEX,orinput13charactersifyouselectASCII.128bitsencryption