User's Manual

48
SecuritySetting:Setthesecurityoptions(wirelessdataencryption).Pleaserefertochapter
4‐2‘SecuritySettings’fordetails.
Country Region Code: Please select the country code of the country or region you live.
Availableoptionsare0‐7,whichwillaffecttheavailablewirelesschannelsyoucanuse:
 0:FCC(U
S,Canada,andothercountriesuses
 FCC radiocommunicationstandards)
 1:ETSI(Europe)
 2:SPAIN
 3:FRA NCE
 4:MKK
 5:MKKI(TELEC)
 6:ISERAL(Channel3to9)
 7:ISERAL(Channel5to13)
Pleasenotethatonly  changethecountry  codeifyouareindiffe
rentcountry.Forexample:
whenoperating this productinUS, onlychannels1~11 canbeoperated.  Selectionofother
channelsisnotpermittedunderFCCregulations.
Noforwardingamongwirelessclients:Check thisboxandwirelessclientswillnotbeableto
sharedatawitheachother.
HideSSID: CheckthisboxandtheSSIDwillnotbebroad
castedtothepublic.Yourwireless
clients must know the exact SSID to be able to connect to your computer. This option is
usefultoenhancesecuritylevel.
AllowBW40MHz:CheckthisboxtoallowBW40MHzcapability.
Beacon(ms): You can defi
ne the time interval that a  beaconsignalshouldbe send. Default
valueis100.Donotmodifythisvalueunlessyouknowwhatwillbeaffected.
TX Power: You can select the wireless output power here. Please select a proper output
power setting according to your actual needs. You may not n
eed 100% of output power if
otherwirelessclientsarenotfarfromyou.
Idle Time: Select the idle time for the wireless access point. Default value is 300. Do not
modifythisvalueunlessyouknowwhatwillbeaffected.

Tosavechanges,click‘Apply’button.Oryoucancl
ick‘Default’toresetallvaluestofactory
defaultvalue.





