User's Manual

31
(2) IfuserwantstoconnecttootherAP,Hecanclick“Connect:buttonfortheintendedAP
tomakeconnection.
(3) If the intended network has encryption other than “Not Use”, RaUI will bring up the
securitypageappropriateinformationtomaketheconnection.
(4) Whenyoudouble‐clickonthei
ntendedAP,youcanseeAP’sdetailinformation.

3.5Advanced
Thiswirelessnetworkcardprovidesseveraladvancedsettingsforexperiencedwirelessusers.
You can change these settings to increasedata transfer perform a nce,  or change operation
mode.

WirelessMode:Selectwirelessmode.S upport2.4Gonly.
EnableTxBurst:Ralink’sproprietaryframeburstmode.
EnableTCPWindowsSize:Enhancethroughout. 
FastRoamingat:Fasttoroaming,setupbytransmitpower.
Select your Country Region Code:The available channel differs  from different countries.
For example: USA (FCC) is chann el 1‐11, Europe (ETSI) is cha
nnel 1‐13. The operating
frequencychannelwillberestrictedtothecountry userlocatedbeforeimporting.Ifyouare
indifferentcountry,youhavetoadjustthechannelsettingtocomplytheregulationofthe
country. Supporting region code for this section has CH1‐11, CH1‐13, CH10‐11, CH10‐13,
CH14, CH1‐14, CH3‐9, and CH5‐13.  Please refer to be
low Channel Classification and range,
CountryChannellisttoselectyourCountryRegionCode:

Figure1:ChannelClassificationandrange