User's Manual

[Data Encryption]

-- Disabled: Disable the WEP Data Encryption.

-- WEP: Enabled the WEP Data Encryption. When the item is selected, you have to continue

setting the WEP Key Length & the key Index.

-- TKIP: Enable the TKIP Data Encryption. When the item is selected, you have to continue

setting the Network Key & Confirm network key.

-- Network Key: The keys are used to encryption data transmitted in the wireless network. Fill

in the text box by following rules below:

Æ 64-bit: Input 10 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the encryption

keys. For example: “0123456aef”

Æ 128-bit: Input 26 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the

encryption keys. For example: “01234567890123456789abcdef”

-- Confirm Network Key: Re-type again the Network key in this text box.

-- Key Length: You may select the 64-bit or 128-bit to encryption transmitted data. Larger key

length will provide higher level of security, but the throughput will be lower.

-- Key Index (Advanced): The maximum of key index is 4.

3.4 Advanced

In the “Advanced”, you can configure Wireless LAN adapter’s Power Save, Wireless Mode,

802.00b Preamble Mode, Channel Plan, Fragment Threshold, and RTS Threshold.