User's Manual

IMPORTANT NOTE:

In the event that these conditions cannot be met (for example certain laptop configurations or

co-location with another transmitter), then the FCC authorization is no longer considered valid

and the FCC ID cannot be used on the final product. In these circumstances, the OEM

integrator will be responsible for re-evaluating the end product (including the transmitter) and

obtaining a separate FCC authorization.

End Product Labeling:

This transmitter module is authorized only for use in device where the antenna may be

installed such that 20 cm may be maintained between the antenna and users (for example

access points, routers, wireless ADSL modems, and similar equipment). The final end product

must be labeled in visible area with the following:

“ Contains RF Module FCC ID: RXZ-WM81RL ”

End Product Manual Information

The user manual for end users must include the following information in a

prominent location “IMPORTANT NOTE: To comply with FCC RF exposure

compliance requirements, the antenna used for this transmitter must be

installed to provide a separation distance of at least 20 cm from all persons

and must not be co-located or operating in conjunction with any other antenna

or transmitters”.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

without written consent from the company.

Revision History

V1.0 First release

All brand and product names mentioned in this manual are trademarks and/or registered

trademarks of their respective holders.