User's Manual

23
3.5 Advanced
In the “Advanced”, you can configure more advanced settings, for example: wireless
Mode, B/G Protection, Tx Rate, Country Region Code…etc.
Wireless Mode: Select wireless mode. 802.11 B only, 802.11 B/G mix, 802.11 B/G/N mix,
802.11 B/G mix, and 802.11 B/G/N mix modes are supported
Select Your Country Region Code: The available channel differs from different countries.
For example: USA (FCC) is channel 1-11, Europe (ETSI) is channel 1-13. The operating
frequency channel will be restricted to the country user located before importing. If you are in
different country, you have to adjust the channel setting to comply the regulation of the
country.
Wireless Protection: If you have a mix of 802.11b & 802.11g wireless stations in the network,
it is recommended to enable the protection mechanism. This mechanism can decrease the
rate of data collision between 802.11b and 802.11g wireless stations. When the protection
mode is enabled, the throughput of the adapter will be a little lower due to many of frame traffic
should be transmitted.
Auto – Based on the status of network and automatically disable/enable protection
mode.
On – Always enable the protection mode.
Off – Always disable the protection mode.
Tx Rate: Manually force the Transmit using selected rate. Default is Auto. (802.11n wireless
card don’t support TX Rate now)