User's Manual

For Example:

How to set your ACL?

1. You must choose Activated to enable your ACL function.

2. Select the ACL Rule Index number (up to 16 number)

3. You can set the specific Secure IP address or set 0.0.0.0 for all IPs.

4. Choose the Application which you want to access for this ACL Rule index.

5. Select the Interface you want to access from.

6. After all settings are ready, click SAVE and continue next ACL Rule Index setting.

[Note]

1. You must set one ACL index to access your router via LAN interface. If you don’t, your

router cannot access other listed IP Address. (Refer to Index 1).

2. Remember! Once you active your ACL function, you only can access via router by

listed Secure IP Address.