User's Manual
9
2. Hardware Installation
2.1 System Requirements
Pentium III 266 MHz processor or higher
128 MB RAM minimum
20 MB of free disk space minimum
RJ45 Ethernet Port
2.2 Package Contents
Wireless ADSL2+ Ethernet Router
RJ-45 Ethernet cable
RJ-11 Phone cable
Power Adapter
Quick Installation Guide
2.3 Front Panel Indicators and Description
Front panel of this Wireless ADSL2+ router has LED indicators to display router’s
operating status.
Descriptions of LED status
PWR When an active power adapter is connected with this router, this LED will light up.
WLAN
When connection with Internet (ADSL Connected) is established, this LED will light up.
The LED is flashing: Physical connection is sending the data.
4 When port 4 connection with end user is established, this LED will light up.
3 When port 3 connection with end user is established, this LED will light up.
2 When port 2 connection with end user is established, this LED will light up.
1 When port 1 connection with end user is established, this LED will light up.
ADSL
When connection with Internet (ADSL Connected) is established, this LED will light up.
When this LED is flashing: NO ADSL physical connection