User's Manual

32
802.11 equipment that you will be using transmits at power levels between 1 and 100 mW
Associated Clients: This table shows MAC address, transmission, reception packet counters
and encrypted status for each associated wireless clients.
4.4.2 Advanced Settings
These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. These settings should not be changed unless you know what effect the
change will have on your Access Point.
Authentication Type: There has 3 types – Open System, Shared Key, and Auto
Fragment Threshold: Fragmentation Threshold sets the frame size of incoming messages
(ranging from 256 to 2346 bytes) used as fragmentation boundary. If the frame size is too big,
the heavy interference affects transmission reliability. If the frame size is too small, it
decreases transmission efficiency. Default setting is 2346.
RTS Threshold: Lower the signal RTS (Request To Send) to promote the transmission
efficiency in condition of noisy environment or too many clients. Default setting is 2347.
Beacon Interval: Beacon Interval means the period of time between one beacon and the next