User's Manual

z Supports Quality of Service (QoS), 802.11e, WMM

z MAC Address Filtering

 Security

z PPP over PAP (Password Authentication Protocol; RFC1334)

z PPP over CHAP (Challenge Authentication Protocol; RFC1994)

z DOS Protection

z Stateful Packet Inspection (SPI)

z Built-in NAT Firewall

z IP-based Packet filtering

z Password Protected System Management

 Web-Based Management

z Web-Based GUI configuration / Management

z CLI (Command Line Interface) via serial interface or Telnet over Ethernet

z Telnet Remote Management

z Firmware upgrade via FTP / TFTP

z SNMP Support

z HTTPS Support

z Built-in Diagnostic Tool

z TR-069 support

 Network Address Translation (NAT)

Network Address Translation (NAT) allows the translation of an Internet protocol address used

within one network (for example a private IP address used in a local network) to a different IP

address known within another network (for example a public IP address used on the Internet).

 Universal Plug and Play (UPnP)

Universal Plug and Play is a standard that uses Internet and Web protocols to enable devices

such as PCs, peripherals, intelligent appliances, and wireless devices to be plugged into a

network and automatically know about each other. This protocol is used to enable simple and

robust connectivity among stand-alone devices and PCs.

 Dynamic DNS Support

With Dynamic DNS support, you can have a static hostname alias for a dynamic IP address,

allowing the host to be more easily accessible from various locations on the Internet. You must