User's Manual

45
Outgoing Default Action -- Specify the default action on the LAN to WAN forwarding path.
Incoming Default Action -- Specify the default action on the WAN to LAN forwarding path.
Apply Changes -- Click to save the setting of default actions to the configuration.
Direction -- Traffic forwarding direction.
Protocol -- There are 3 options available: TCP, UDP and ICMP.
Rule Action -- Deny or allow traffic when matching this rule.
Source IP Address -- The source IP address assigned to the traffic on which filtering is
applied.
Source Subnet Mask -- Subnet-mask of the source IP.
Source Port -- Starting and ending source port numbers.
Destination IP Address -- The destination IP address assigned to the traffic on which filtering
is applied.
Destination Subnet Mask -- Subnet-mask of the destination IP.
Destination Port -- Starting and ending destination port numbers.
Delete Selected -- Delete selected filtering rules from the filter table. You can click the
checkbox at the Select column to select the filtering rule.
Delete All -- Delete all filtering rules from the filter table.