User's Manual
43
Attain DNS Automatically -- Select this item if you want to use the DNS servers obtained by
the WAN interface via the auto-configuration mechanism.
Set DNS Manually -- Select this item to configure up to three DNS IP addresses.
Apply Changes -- Set new DNS relay configuration. New parameters will take effect after
save into flash memory and reboot the system.
[Dynamic DNS]
Each time your device connects to the Internet, your ISP assigns a different IP address to your
device. In order for you or other users to access your device from the WAN-side, you need to
manually track the IP that is currently used. The Dynamic DNS feature allows you to register
your device with a DNS server and access your device each time using the same host name.
The Dynamic DNS page allows you to enable/disable the Dynamic DNS feature.