User's Manual

41
IP Pool Range -- Specify the lowest and highest addresses in the pool.
Max Lease Time -- The Lease Time is the amount of time that a network user is allowed to
maintain a network connection to the device using the current dynamic IP address. At the end
of the Lease Time, the lease is either renewed or a new IP is issued by the DHCP server. The
amount of time is in units of seconds. The default value is 86400 seconds (1 day). The
value –1 stands for the infinite lease.
Domain Name -- A user-friendly name that refers to the group of hosts (subnet) that will be
assigned addresses from this pool.
Apply Changes -- Set new DHCP server configuration. New parameters will take effect after
save into flash memory and reboot the system.
Undo – Discard your changes.
[DHCP Relay]
Some ISPs perform the DHCP server function for their customers’ home/small office network.
In this case, you can configure this device to act as a DHCP relay agent. When a host on your
network requests Internet access, the device contacts your ISP to obtain the IP configuration,