User's Manual

AnnexL Option -- Enable/Disable ADSL2/ADSL2+ Annex L capability

AnnexM Option -- Enable/Disable ADSL2/ADSL2+ Annex M capability.

ADSL Capability -- “Bitswap Enable”: Enable/Disable bitswap capability.

“SRA Enable”: Enable/Disable SRA (seamless rate adaptation) capability.

Tone Mask -- Choose tones to be masked. Masked tones will not carry any data.

Apply Changes -- Click to save the setting to the configuration and the modem will be

retrained.

4.6 Service

There are three sub-menus for Service configuration: DHCP Settings, DNS, Firewall, UPnP,

and RIP.

4.6.1 DHCP

This page is used to configure [DHCP Relay] and [DHCP Server].

[DHCP Server]

By default, the device is configured as a DHCP server, with a predefined IP address pool of

192.168.1.2 through 192.168.1.100 (subnet mask 255.255.255.0).