User's Manual

that uses the UDP protocol on port 161 to communicate between clients and servers. The DSL

device can be managed locally or remotely by SNMP protocol.

SNMP -- Enable/disable RIP feature.

System Description -- System descriptions of the DSL device.

System Contact -- Contact person and/or contact information for the DSL device.

System Name -- An administratively assigned name for the DSL device.

System Location -- The physical locations of the DSL device.

System Object ID -- Vendor object identifier. The vendor’s authoritative identifications of the

network management sub-system contained in the entity.

Trap IP Address -- Destination IP address of the SNMP trap.

Community name (read-only) – Name of the read-only community. This read-only

community allows read operation to all objects in the MIB.

Community name (write-only) -- Name of the write-only community. This write-only

community allows write operation to the objects defines as read-writable in the MIB.

Apply Changes -- Save SNMP configuration. New configuration will take effect after saving

into flash memory and rebooting the system.