User's Manual

52
RIP -- Enable/disable RIP feature.
Apply Changes -- Click to save the setting of this setting block to the system configuration
Interface -- The name of the interface on which you want to enable RIP.
Receive Mode -- Indicate the RIP version in which information must be passed to the DSL
device in order for it to be accepted into its routing table.
Send Mode -- Indicate the RIP version this interface will use when it sends its route
information to other devices.
Add -- Add a RIP entry and the new RIP entry will be display in the table
Delete Selected -- Delete a selected RIP entry. The RIP entry can be selected on the Select
column of the RIP Config Table.
Delete All -- Delete all RIP rules from the table.
4.7 Advance
4.7.1 ARP Table
This table shows a list of learned MAC address.