User's Manual

72
9.3 Firmware
You can upgrade the firmware and Romfile of the router in this page. Make sure the
firmware you want to use is on the local hard drive of the computer. Click on Browse to browse
the local had drive and locate the firmware to be used for the update. Then press UPGRADE to
upload new Firmware. It might take several minutes, don’t power off it during upgrading.
Device will restart after the upgrade!!
After a success upload, the system automatically restarts. Please wait for the device to finish
restarting. This should take about 2 minutes or more. You need to log in again if you want to
access the device.
Current Firmware Ver.: This filed displays the current firmware version.
New Firmware Location: Type in the location of the file you want to upload in this field or click
Browse… to find it.
UPGRADE: Click UPGRADE to begin the upload process.
9.4 System Restart
The SysRestart screen allows you to restart your router with either its current settings still
in place or the factory default settings.
If you wish to restart the router using the factory default settings (for example, after a
firmware upgrade or if you have saved an incorrect configuration), select Factory Default
Settings to reset to factory default settings. Otherwise, you can select Current Settings. You
may also reset your router to factory settings by holding the DEFAULT button on the back panel
of your router in for 10-12 second while the router is turned on.