User's Manual

Wireless 11g CardBus Card CB54G2 User’s Guide

Click

Tip: The card should be

installed into your computer

before installing the driver

and utility.

>>> 2.3 Installing the Driver and Utility

This section describes the procedures of installing the

driver and utility. Follow the instruction step by step to

finish the installation. If you use Windows

98SE/ME,

please prepare the Windows

Setup CD at hand before

installing the driver; because the system will ask you to

insert the Setup CD to copy files during the installation.

Please NOTE that the CB54G2 should be installed into

your computer before installing the driver and utility. Then,

turn on the computer, and the operating system will detect

a new device and start to configure the new device. Click

Cancel here to start installation from the InstallShield Wiz-

ard.

Insert the software CD into your CD-ROM drive, and the

Setup program should launch automatically.

If the Autorun program doesn’ t launch automatically, click

Start at the taskbar and select Run.... Type E:\setup.exe

in the Open box and click OK (E is your CD-drive) to launch

the Setup program manually.

The main screen of Setup program will appear as below.

Click the Install Software button.

Step 1.