Operating instructions

- 8 -
8. Technical data (Other models included for comparison)
Gas converter series CG
®
Version CG-2 Version CG-2M Version CG-2H Version CG-2MH Version CG-
10a
Part No. 50 A 1600 50 A 1500 50 A 1800 50 A1700 50 A1206a
Gas inlet non-heated (cold) or heated (hot) non-heated non-heated heated heate
d
Non-heated
Bypass solenoid valve — 2x — 1x Manual valve
Temperature of sample gas max. +80 C
dew point „dry“
max. +250 C
dew point <160 C
max. +80 C
dew point „dry“
Temperature range, adjustable max. 700 C with 230V max.
500 C
with 230V/115V
max.
360 C
with 230V/115V
max. 600 C with 115V(a)
Gas flow rate max. 90Nl/hr
Operating pressure max. 2bar abs.
Warm-up time approx. 45min.
Operating temperature at NO
2
/NO
30Nl/hr = 330 C; 60Nl/hr = 330 C; 90Nl/hr = 340 C
Conversion NO
2
/NO
efficiency >95% with new catalyst
Life of catalyst NO
2
/NO approx. 12 months, flue gas at flow 30Nl/hr with 10ppm NO
2
, 5Vol.-% O
2
NO
2
/NO-catalyst
in an exchangeable cartridge
Differential pressure < 20mbar
Ambient temperature +10 C to +50 C
Storage temperature -25 C to +65 C
Relative humidity < 80%
Sample gas connection: inlet PVDF-Fitting G1/4“i DIN228/1 Ø6mm tube connector,
SS316*
¼” SS316
Sample gas connection: outlet PVDF connector G1/4“i DIN ISO 228/1 ¼” SS316
Power supply/power consumption 230V, 48-62Hz, 520VA 230V, 48-62Hz,
620VA
115V, 48-62Hz,
550
VA
or (a) 115V, 48-62Hz, 140VA or (a) 115V, 48-62Hz,
240VA
Electrical connection mains power plug connector incl. 2 fine fuse 5x20mm, Terminal Block
230/3, 15A or 115/3, 15A; 2m cable and shock-proof plug;
Alarm-/control signals 9 pin sub-D connector
Status signals for temperature NO contact, potential-free, contact rating max. 24V, 1A
Materials of sample contacting parts st. steel SS316, PVDF, PTFE, FPM, PEEK (only at ...-2H resp ................. MH)
Degree of protection IP20, EN60529 Purgeable Case
Housing 19“ rack mounting, 84HP(TE), 3U(HE), depth: 350mm
Weight approx. 6kg
Electrical equipment standard EN61010, EN60519-1
Option:
Wall mounting bracket, 3HE - 84TE
Part no.: 50A3000
M&C Products Analy sis T echnology