User`s guide

7.3 Figure E - The T-Max® Mgr/Pro

7.5

Front View of the T-Max® Mgr/Pro

7.4 Figure F - Connecting The T-Max® Series

9VAC

RJ-22 Modular Cables Link Each Room.

2 T-Max® Mgr/Pro’s can be connected to control up to 128 beds!

An ADNET-Repeater may be needed if you are installing more than 25 T-

Max® 3A’s.

CONNECTING THE T-Max® SERIES IS EASIER THAN EVER!

RJ-22 Modular

Cable Connector

DB9F RS-232 Connector

T-Max® Manager/Pro and T-Max® 3A User’s Guide Page 22

Figure H - Modular Cable Pin-outs

RJ-22 Connector Untwisted Modular Cable RJ-22 Connector

Use this diagram if you are making your own cables

Important!!!

Salon Systems, Inc. highly recommends that you do not modify the cables provided with

each T-Max® 3A. If you need longer cables, contact your dealer or Salon Systems, Inc.

All cables are pre-tested at the factory for proper connection. If you are not careful in

making your own cables, the system may not work properly!

Note: If you are making your own cables, you will need a tool for connecting RJ-22

connectors. Call Techni-Tool @ 1-800-832-4866 and ask for part number 702ST019.

7.6 Figure I – Connecting An External Push

Button to a T-Max® 3A

To external start screw

terminals on back of T-

Max® 3A

Pushbutton

The T-Max® 3A can be ordered with an external push button option. When the

button is pushed, a contact closure is applied to the External Start input on the

T-Max® 3A. If the T-Max® 3A is in delay, the bed will be energized without

having to press the Start/Stop button.

T-Max® Manager/Pro and T-Max® 3A User’s Guide Page 21