User Manual

→Installation is Complete for Rustler, Bandit & Stampede (without
Wheelie Bar)! Enjoy the Improved Performance!
↓Continue for Slash 2WD Bumper and Stampede 2WD Wheelie Bar Installation
Step 8:
Locate the 2 Long screws and Spacer in the separate Hardware Bag. These will be
used to attach the bumper/wheelie bar to the transmission.
Step 9:
Install the longer of the 2 screws into the bottom as shown all the way through to
the Aluminum Motor Mount. Use Blue Thread Locking Compound for security.