Instructions / Assembly
WATER QUALITY TEST KIT
Uncontaminated drinking water is essential for good health, yet it can contain contaminants that are potentially
harmful. The US EPA does not regulate private drinking water. Greater than 20% of ground water wells contain
at least 1 (one) contaminant at levels that are a potential health concern. Your family deserves the safest and
healthiest water possible.
WHAT IS WATER QUALITY?
Although your drinking water may look and taste good, it may contain harmful contaminants. While some contami
-
nants and concentration levels are considered safe, others may be capable of causing a wide range of health
problems. For this reason, it is very important to know the amount and kinds of contaminants that are in
your drinking water. Water quality is determined by the amount of contaminants in your drinking water. If the
contaminants in your water are relatively harmless, the water is considered safe to drink. If any contaminants
in the water are hazardous to human health, you should not drink the water.
WHERE DOES YOUR DRINKING WATER COME FROM?
About half of our drinking water supply comes from surface water such as streams, rivers and lakes. The
other half comes from water found underground. Using both surface water and groundwater, 140,000 water
utilities supply water to 320 million people in the United States. More than one-third of Americans receive their
drinking water from wells.
HOW DO YOU FIND OUT IF YOU HAVE A WATER QUALITY PROBLEM?
To find out if the water in your home, school or office is safe to drink, you must test.
The PRO-LAB
®
Water Quality
Test Kit is the most complete and accurate instant water test available to the consumer. The NON-TOXIC
laboratory grade test strips provide quick and reliable results.
If you would like to have a professional water inspection, go to www.inspectorseek.com and an IAC2 / INTERNACHI
home inspector can identify the source of a potential problem in your home, school or office water supply.
NOMINAL SENSITIVITY
pH: 2.0 to 12.1
Total Alkalinity: 0 to 24 parts per million
Total Chlorine: 0 to 10 parts per million
Total Hardness: 0 to 425 parts per million
Iron: 0 to 5 parts per million
Copper: 0 to 5 parts per million
Nitrate: 0 to 50 parts per million
Nitrites: 0 to 5 parts per million
COMPLETE DIRECTIONS INSIDE • KEEP OUT OF REACH OF CHILDREN
IF YOU HAVE ANY QUESTIONS OR COMMENTS PLEASE CALL (954) 384-4446 OR VISIT US ON THE INTERNET AT:
WWW.PROLABINC.COM
MADE IN U.S.A.
PL7600 25M 12/15
COPYRIGHT © PRO-LAB®, INC. 2015
“Home Safety Test Kits”
WESTON, FLORIDA, 33326