Specifications

tension 9 Evolution · Revision 2014.01.24

Starting the motor, changing replay speed

Press the button START to start the turntable. For change the speed from 33 r.p.m. to 45 r.p.m., please

press the START button again. Speed is correct, when the LED diode stops blinking. To switch turntable

to STAND BY mode, please hold the button START for 3 seconds.

Useful tips

The base and the record player should be positioned on a low-resonance surface such as wood or

multiple layer ply board to avoid structural vibrations disturbing replay.

Technical specifications

Pro-Ject

tension 9 Evolution / Pro-Ject 9cc Evolution

Electronic speed change 33/45 rpm.

Speed variance max. ±0,09 %

Wow and flutter max. ±0,1 %

Signal to noise 73dB

Effective tonearm mass 8,5g

Effective tonearm length 9 " (230mm)

Overhang 16mm

Power consumption 4W/0W standby mode

Outboard power supply 15V / 0 - 0.8mA DC (set at 0.5mA), universal power supply

Dimensions (W x H x D) 465 x 185 x 350mm, dust cover open 465 x 440 x 420mm

Weight 18kg

Lenght Connect it connection

cable

1,23 m

Capacity tonearm cable 65pF/meter

Maintenance and cleaning

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened

antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust!

Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid

damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is

carried out to avoid damage.

If the player is not used over a long period of time the drive belt can be removed to prevent unequal

stretching.

Always disconnect the record player from the mains power supply as a precaution before

maintenance!