User Manual

© Pro-Ject Audio Systems · Pro-Ject Essential I I I F l exi -Ra ng e · Revision 22.04.2021
9
Take care to connect the left and right channels correctly. The right channel is usually marked red, the left
channel black or white. The earthing wire of the tonearm lead should be connected to the earth terminal on
your amplifier (if provided).
ESSENTIAL III SB SPECIFIC INFORMATIONS
Controls, features and connections
1 SPEED CONTROL
2 DRIVE PULLEY
3 PHONO OUTPUT, EARTH CONNECTION
__________________________________________________________________________________________
Switching on and off, changing replay speed
To play records at 33 r.p.m. press the speed control switch to starts the motor. Pressing the ON/OFF switch
two times selects 45 r.p.m.. The selected speed is shown respectively by the flashing LED. When the platter has
attained full speed, the LEDs stop flashing.
A long (more than three seconds) press on the ON/OFF switch stops the motor.
Connection to the amplifier
Connect the tonearm cable provided with the accessories to the RCA tonearm output that is located at the
rear of the turntable, behind the tonearm. Connect the grounding cable on the earth connection screw.