User Manual

Take care to connect the left and right channels correctly. The right channel is usually marked red, the left

channel black or white. The earthing wire of the tonearm lead should be connected to the earth terminal on

your amplifier (if provided).

The digital output:

The record player has digital S/PDIF output through optical connector with switch between 24bit/48kHz and

24bit/96kHz. Use the optical input on your amplifier, AV receiver or D/A converter. Optical cable is not

supplied with the record player. Your dealer can help you with selection of the optical cable.

ESSENTIAL III Recordmaster SPECIFIC INFORMATIONS

Controls, features and connections

1 SPEED CONTROL

2 DRIVE PULLEY

3 PHONO/LINE OUTPUT, EARTH CONNECTION

4 PHONO/LINE OUTPUT SWITCH

__________________________________________________________________________________________

Switching on and off, changing replay speed

To play records at 33 r.p.m. press the speed control switch to starts the motor. Pressing the ON/OFF switch

two times selects 45 r.p.m.. The selected speed is shown respectively by the flashing LED. When the platter has

attained full speed, the LEDs stop flashing.

A long (more than three seconds) press on the ON/OFF switch stops the motor.