Cov lus qhia

© Pro-Ject Audio Systems · Pro-Ject A/D Phono Box S · Revision 2014.7.29
4
Connecting to a Computer
Connect the USB-output of the unit to a free USB-socket on your computer and turn it on/make sure it is
powered on.
The “new hardware found assistant will automatically detect the unit and announces it as a Microphone USB
audio codec. There is no need to install a driver manually.
After installation, one setting has to be done. For example - Windows 7
®
operating system:
Control Panel Sound Recording
Microphone USB Audio CODEC Properties
Advanced: set to
2 channel, 16 bit, 48000 Hz (DVD Quality)
Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.
Recording Programme
In case you do not have a recording programme installed on your computer, you may download one free from
the Internet. Recording programmes can be found easily by searching Google or Yahoo.
Technical specifications Pro-Ject A/D Phono Box S
A
Typical for low output MC cartridges,
B
typical for MM or high output MC cartridges
Input capacitance/input impedance, MC: 100ohms/120pF
A
Input capacitance/input impedance, MM: 47kohms/120pF
B
Gain, MM: 40dB
Output voltage typically: 300mV/1kHz at 3mV (MM input)
Gain, MC: 60dB
Output voltage typically: 300mV/1kHz at 0,3mV (MC input)
Gain, line level input: 11dB
Max. output 9,5Vrms / 1kHz
Noise floor, MM / MC: 94dB (A weighted) / 75dB (A weighted)
THD, MM / MC: <0,01% / <0,05%
RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,5dB
A/D converter: Burr Brown PCM2904 16-Bit Delta Sigma
Sampling rates: 32, 44,1 and 48kHz
USB output: 5 pin mini b connector (USB cable supplied)
USB signal: digital serial data protocol USB 1.1
Operating systems: Windows XP
®
, Windows VISTA
®
, Windows 7
®
, Windows 8
®
, Mac
Inputs (
Phono-In / Line-In): 1 pair RCA/phono sockets/3-pole 3,5mm co-axial jack
Output: 1 pair RCA/phono sockets
1xS/PDIF optical
THD: 0,005%
Noise floor: 96dB
Dynamic range: 93dB
Outboard power supply: 18V/500mA DC
Power consumption: 100mA DC, <1W in standby
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (115)mm
Weight: 580g without power supply