User Manual
Table Of Contents
- INSTRUCTIONS FOR USE
- )
- Pro-Ject Debut RecordMaster
- Controls, features and connections
- Safety instructions
- Set-up
- Cartridge downforce adjustment
- Anti-skating force adjustment
- Connection to the amplifier
- Connecting to a Computer
- Recording Programme
- Fitting the lid
- Switching on and off, changing replay speed
- No signal through one or other channel or both channels:
- Strong hum on phono input:
- Distorted or inconsistent sound from one or both channels:
- Warning of a hazard for the user, the unit or possible misuse
- Important notice
© Pro-Ject Audio Systems · Pro-Ject Debut RecordMaster · Revision 2017.01.13
3
Pro-Ject Debut RecordMaster
Controls, features and connections
1 Motor brackets with Ortofon
®
pads
2 Stepped drive pulley
3 Drive belt * 3a Hook *
4 Sub-platter
5 Platter *
6 Tonearm counterweight * 6a Downforce scale
7 Tonearm lift lever
8/18 Tonearm rest and removable transport lock
9 Tonearm tube 9a Tonearm base
10 Lid *
11 Lid hinges
12 Hinge fasteners
13 Mains lead
14 Phono output sockets, earth connection and USB-out
15 Anti-skating stub with anti-skating weight adjustment scale
16 Anti-skating weight *
17 Anti-skating weight support hoop
19 Speed control
20 Headshell with finger lift
21 Motor
22 Single adapter *
Connection cable (not shown) *
Power supply (not shown) *