Product Manual

Table Of Contents

Pro-Ject Debut PRO

Controls, features and connections

1 Motor with TPE damped flange

2 Stepped drive pulley

3 Drive belt

4 Sub-platter

5 Platter with TPE damping and felt mat

6 Tonearm counterweight

7 Tonearm rest and removable transport lock

8 Tonearm lift lever

9 Tonearm base with VTA adjustment

10 Tonearm tube

11 Lid

12 Lid hinges

13 Hinge fasteners

14 Phono output sockets and earth connection

15 Power supply socket

16 Anti-skating weight

17 Anti-skating weight support hoop

18 Anti-skating weight adjustment scale

19 Height adjustable feet with TPE damping

20 Speed selector

21 Headshell with finger lift and fitted Pro-Ject Pick it PRO

22 Single adapter

Phono cable Connect it E (not shown)

Stylus pressure gauge (not shown)

Two-point cartridge alignment protractor (not shown)

Round drive belt (78 RPM)

Flat drive belt (33, 45 RPM)

Allen key 1.5mm, 2mm

During assembly and adjustment of the deck small parts could be lost if not carefully placed in a

suitable receptacle. Before starting to assemble, get familiar with the parts listed above and

correspondingly numbered in the technical drawings above.