INSTRUCTIONS FOR USE Pro-Ject USB Box S+
Dear music lover, thank you for purchasing a USB Box S+ from Pro-Ject Audio Systems. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
24Bit/192kHz driver (Windows® operating systems only) * For Windows® operating systems a Pro-Ject USB Audio driver has to be installed. Insert the included CD into the drive of your PC and follow the instructions. After installing the driver, some settings have to be done. For example - Windows 8® operating system: Control Panel Hardware and Sound Sound Playback: select Project USB Box S+ USB 2.
Service Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only if the problem cannot be resolved there the unit should be sent to the responsible distributor in your country. Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use.
