Manual

© Audio Trade GmbH · Pro-Ject iPod goes digital-Set · Revision 2013.1.15
6
Replacing batteries
Proceed as follows:
 Unlock and slide open the battery case cover
 Replace the battery.
Make sure the battery is the right way round !
 Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
Technical specifications Pro-Ject Stereo Box S
Power output: 2 x 25W/30W at 8 ohms/4 ohms (both channels driven)
Frequency response: 20Hz - 20kHz (±0,2dB)
Channel separation: >40dB at 20kHz
Noise floor: >-100dB (A weighted)
THD: <0,05% at 10W
Gain: 22dB
Line-level inputs: 2 pairs RCA/phono sockets
Input impedance: 20kohms
Record Out: 3-pole 3,5mm co-axial jack
Speaker connectors: 4mm banana plugs, spades connectors or naked wire
Outboard power supply: 20V/3A DC (peak 7A DC), suitable for your country's mains supply
Power consumption: 3A DC, <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (122)mm
Weight: 720g without power supply
Technical specifications Pro-Ject Dock Box S Digital
Frequency response: 20Hz - 20kHz
Line-level output: 1 pair RCA/phono sockets
Output impedance: 15 ohms
Output voltage: max. 0,775Vrms
Volume control and mute: min. level -68dB
Digital output: co-axial (S/PDIF)
D/A-converter: Cirrus Logic. 24Bit/192kHz
Video output: S-video socket
Outboard power supply: 9V/2A DC, suitable for your country's mains supply
Power consumption: 800mA DC max.. Power consumption is not constant.
It depends on the charging needs of the battery. <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (109)mm - height plus height of iPod
®
/iPhone
®
Weight: 585g without power supply
Technical specifications Pro-Ject Speaker Box 5
Recommended amplifier power: 10 - 150 watts
Impedance: 8ohms
Sensitivity (1W/1m): 86dB
Dimensions W x H x D / weight: 160 x 255 x 210mm / 4,2kg